154
Keysight B2980B User’s Guide, Edition 1
Front Panel Reference
Display and Assist/Function Keys
Count
Number of waveforms to be generated in one device action.
Use the rotary knob and assist keys to set the parameters. When the field pointer
is in the EDIT (green) status on an entry field, the assist keys are changed to the
unit keys as shown below.
•
mV and V for voltage value setting
•
s, ms, s and ks for time value setting
For the range mode of the sweep source, see
“Sweep Dialog Box” on page 174
. If
the range mode for the sweep source is set to BEST, the
Spot Source Range
parameter setting in the range setup sub-panel is not effective. It is effective for
the constant source and FIXED range mode of the sweep source.
List sweep
setup
When the field pointer is in the EDIT (green) status on the LIST sweep
Start/Stop/Points field, the following assist keys are available for setting the list
sweep source.
Edit
Opens the List Sweep dialog box used to set the list sweep
source.
Load
Opens the Load List Sweep Data dialog box used to load a list
sweep data from a USB flash drive connected to the front panel
USB-A connector.
•
List Sweep dialog box
This dialog box provides the following fields for setting the list sweep source.
After the list is completed, press OK to apply the data and close the dialog box.
(data graph)
Displays the shape of the list sweep output
(data list)
Lists the data index in the left cell and the output value in
the right cell.
When the pointer is in the MOVE status, turning the rotary
knob moves the pointer onto the left or right cell. And
pressing the knob changes the status to EDIT.
When the right cell is in the EDIT status, the output value
can be entered by using the rotary knob.
When the left cell is in the EDIT status, the following assist
keys are available for creating and scrolling the list.
Then turning the rotary knob scrolls the list and pressing the
knob changes the status to MOVE.
Summary of Contents for B2980B Series
