Keysight Technologies N5222B, Service Manual

Page: 32 / 226

2-4 Keysight N5290/1A Service Guide
General Product Information
Required Service Test Equipment
2-
Equipment
a
Critical Specifications Recommended
Model or Part
Number
Alternate Model
or Part Number
Use
b
Calibration and Verification Tools
1.0 Precision Calibration Kit -- 85059B n/a P,A,T,V
ECal module
(300 kHz to 26.5 GHz)
Recommended, but not
required.
N4691D
300 kHz to 26.5 GHz
Equivalent or
better
V
Power supply load ET -- ET57265 None P,A,T,V
LO Cal and RF Eterm ET -- ET57259-1 None P,A,T,V
WBIF and LFE Eterm ET -- ET57259-2 None P,A,T,V
Cables
System Cable -- N4011-21002 None P,A,T,V
Cables (x6) --
N5240-60092
c
Equivalent or
better
P,A,T,V
3.5 mm (m) to 3.5 mm (m)
Cables (x2 or x4) - Front
Panel - (36 inches long)
-- Z5623-K20 Equivalent or
better
P,A,T,V
GPIB cable 4 foot 10833B Equivalent or
better
P,A,T,V
Adapters
1.0 mm (f) to 10 mm (f)
(short thru)
Return Loss: ≥ 14 dB
11920-60002
d
None P,A,T
SMA (m) to SMA (f) elbow
adapters
e
Return Loss: ≥ 14 dB 1250-2818 Equivalent or
better
P,A,T,V
SMA (m) to SMA (f) thru
adapters (x8)
f
Return Loss: ≥ 14 dB 1250-3851 Equivalent or
better
P,A,T,V
a. Unless specified otherwise, equipment listed is required for all analyzer models.
b. P = Performance tests, A = Adjustments, T = Troubleshooting, R = Repair, V = System verification
c. N5240-60092 is the longer cable that is used on the PNA LO OUT to N5292A test set’s LO IN (rear panel).
d. This is a short thru that is not included in the 85059B calibration kit.
e. Use x3 for front panel wideband IF and LFE Eterms.
f. Use x5 as connector savers on the rear panel IF ports (optional). Use x3 for front panel wideband IF and LFE Eterms.