manualshive.com logo in svg

Keysight Technologies 85091D, Reference Manual

Share
Download
Keysight Technologies 85091D Reference Manual Download Page 79

Electronic Calibration Modules Reference Guide                                                                               3-13

Operating ECal Module
Validating a Calibration

— The System Verification Procedure is also a method for verifying the 

performance of your analyzer.

— Verification kits use accurately known standards with well defined 

magnitude and phase response. These kits include precision airlines, 

mismatch airlines, and precision fixed attenuators.

— Each verification kit standard is measured precisely by Keysight’s accredited 

test laboratory. The measurement data and uncertainty of each standard 

are provided in each kit on a disk or USB storage drive.

— Verification kits may be re-certified by Keysight. Contact Keysight for 

information about ordering verification kits - see 

“Contacting Keysight” on 

page 1-29

.

For detailed information on using your analyzer’s built-in System Verification 

Procedure, refer to the appropriate service guide or online Help. To use the 

internet to view the ENA, PNA, or PXIe online Help, use the steps listed in 

“Finding More Information on Performing a Calibration” on page 3-10

.

Summary of Contents for 85091D













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands