manualshive.com logo in svg

Keysight Technologies 85091D, Reference Manual

Share
Download
Keysight Technologies 85091D Reference Manual Download Page 155

Electronic Calibration Modules Reference Guide                                                                               5-49

Specifications and Characteristics
Measurement Uncertainty Calculator

Measurement Uncertainty Calculator

This section provides information about determining the uncertainty of the 

measurements on your network analyzer.

Download the Vector Network Analyzer Uncertainty Calculator

You can download a program from Keysight that provides the measurement 

uncertainty associated with your vector network analyzer measurement and 

ECal module. Go to www.keysight.com/find/na_calculator and follow the 

instructions on the Web site to download the program.
The program uses your Keysight network analyzer model number, your ECal 

module model number, and electrical limits to calculate specific uncertainty 

charts for your network analyzer. The program is Microsoft Windows based and 

uses a Microsoft Excel spreadsheet to calculate, graph, and display uncertainty 

curves.

Summary of Contents for 85091D













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands