manualshive.com logo in svg

Keysight Technologies 85091D, Reference Manual

Share
Download
Keysight Technologies 85091D Reference Manual Download Page 42

 1-34                                                                                Electronic Calibration Modules Reference Guide

General Information
Safety and Regulatory Information

1-

Compliance Notices 

This product has been designated and tested in accordance with accepted 

industry standards, and has been supplied in a safe condition. The 

documentation contains information and warnings that must be followed by 

the user to ensure safe operation and to maintain the product in a safe 

condition.

EMC and Safety Information

EMC

Complies with the essential requirements of the European EMC Directive as 

well as current editions of the following standards (dates and editions are cited 

in the Declaration of Conformity):

— IEC/EN 61326-1
— CISPR Pub 11 Group 1, class A
— AS/NZS CISPR 11
— ICES/NMB-001

 

This ISM device complies with Canadian ICES-001.

 

Cet appareil ISM est conforme a la norme NMB-001 du Canada.000 

 

South Korean Class A EMC declaration

This equipment has been conformity assessed for use in business 

environments. In a residential environment this equipment may cause radio 

interference.

 

This symbol indicates compliance with China RoHS regulations for paper/fiberboard 

packaging.

Table 1-13 

Summary of Contents for 85091D













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands