manualshive.com logo in svg

Keysight Technologies 85091D, Reference Manual

Share
Download
Keysight Technologies 85091D Reference Manual Download Page 45

2- 1

Keysight Electronic Calibration Modules
RF/Microwave Two Port

Reference Guide

2

Preparing ECal for Use

Inspecting the ECal Kit

Inspect the Kit Contents

Verify the case and its contents are not damaged and that all parts are 

included (see items listed in 

Table 2-9

). If the case or any device appears 

damaged, or if the shipment is incomplete, contact Keysight. Keysight will 

arrange for repair or replacement of incomplete or damaged shipments 

without waiting for settlement from the transportation company. See 

“Contacting Keysight” on page 1-29

.

Locate the Serial Number

Your ECal kit has a unique serial number. The serial number is printed on a 

label on the backside of the ECal module.

ECal Kit Serial Number

The serial number with the MY/US prefix on the backside of the ECal module is 

assigned to the ECal 

kit

. Refer to 

Figure 2-1

. The ECal kit contains the ECal 

module and, depending on the option configuration, accessories such as 

wrenches and adapters.

Summary of Contents for 85091D













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands