Kenworth T410, Driver'S Handbook Manual

Page: 54 / 418

Page 28 CAT: 8612 November 2019
OPERATING INSTRUCTIONS
Description
Do not look at the Driver Performance Center for prolonged periods
while the vehicle is moving. Only glance at the monitor briefly while
driving. Failure to do so can result in the driver not being attentive
to the vehicle’s road position or situation which could lead to an
accident and possible death, personal injury or equipment damage.
The Driver Performance Center, located at the top of the instrument cluster,
displays important vehicle information through a constant monitoring of
systems when any of the following conditions are met:
• ignition key in ON or ACC positions
• ignition timer is active
• MCS is pushed or spun (independent of ignition key switch position)
• clock alarm sounds
• driver or passenger door is opened
• hazard warning lamp switch is on
• service brake switch is on
• prime mover marker lamp switch is on
• trailer marker lamp switch is on
• low Voltage Display not active
•
and the screen has not been put into ‘Display Off Mode’
In addition to a blank screen, the following are menu items and the
information available within each of the menu selections.
Some Driver Performance Center functions are only accessible when the
vehicle is parked. Other functions are accessible while the vehicle is moving
or when parked. Each function is identified in the following descriptions.
1. Menu Control Switch Cue
Used to provide the driver with screen navigation feedback. Cues are
provided when a user can push or spin the input control, shows in icon
format which function is active, and which function will come up next if the
knob is rotated either clockwise or counter clockwise.