Kenworth T410, Driver'S Handbook Manual

Page: 124 / 418

Page 98 CAT: 8612 November 2019
OPERATING INSTRUCTIONS
SEATS
This section covers the operation and safe use of your Kenworth seats.
For further information on features and adjustment of the seat, see the seat
manufacturer’s Service and Operation information supplied with the vehicle.
SEAT ADJUSTMENT
Do not adjust the driver’s seat while the vehicle is moving. The seat
could move unexpectedly and can cause the driver to lose control of
the vehicle. After adjusting the seat, and before driving off, always
check to ensure the seat is firmly latched in position.
Standard Driver’s Seat
The standard driver’s seat can be adjusted forward and backward as well
as up and down. The seat back angle can also be adjusted. These three
movements are each controlled by levers located either beneath, or at the
sides of the seat.
Driver’s Seat with Air Suspension
Before driving or riding in the vehicle, ensure there is adequate head
clearance at maximum upward seat travel. You could seriously injure
your head or neck by bumping into the cab roof if clearance is not
adequate.
Reclining Seats
Reclining seats are easy to use if you follow these steps:
1. Make sure the sleeper curtain is tied back.
2. Raise the seat all the way up so the seat will tilt back and
completely clear objects behind you.
3. Do not drive or ride with your seat back in the reclined position.
You could be injured by sliding under the seatbelts in a collision.