Kenworth T410, Driver'S Handbook Manual

Page: 146 / 418

Page 120 CAT: 8612 November 2019
OPERATING INSTRUCTIONS
AUTOMATED TRANSMISSIONS
OPERATING AUTOMATED TRANSMISSIONS
An automated transmission makes shifting much easier, but because
your truck pulls a heavy load, it is important to use it efficiently. For
correct automated transmission operation, see the manufacturer’s Driver/
Operator’s Instruction Manual.
On most automated transmissions there is no
P ark position, so you will
need to apply the parking brake before leaving the cab. See Using the
Parking Brake, page 148.
Parking Brake
On a vehicle with no Park position on the transmission shift selector, always
put the selector in Neutral and apply the parking brake to hold the vehicle
when it is unattended.
If your vehicle has an automated transmission, be aware that it can
roll backwards when stopped on a hill or grade, or when starting
from a stop on a hill or grade. Failure to comply may result in death,
personal injury, equipment or property damage.
Observe the following guidelines:
1.
When stopped on a hill or grade, press the brake pedal.
2.
When starting from a stop on a hill or grade, quickly remove your
foot from the brake pedal and firmly press on the accelerator pedal.
DO NOT leave the cab of your vehicle without applying the parking
brake, turning OFF the ignition and removing the key. The truck
could roll and cause an accident resulting in death or personal injury.
Always apply the parking brake before you leave the cab.