manualshive.com logo in svg

Kenworth T410, Driver'S Handbook Manual

The Kenworth T410 Driver's Handbook Manual is now available for download, absolutely free! This comprehensive manual provides all the essential information and guidance for operating the Kenworth T410 model. Find and download your copy effortlessly from our website, ensuring a seamless and efficient user experience.

Share
Download
background image

Page 96

 

CAT: 8612 November 2019

OPERATING INSTRUCTIONS

VEHICLE TELEMATIC SYSTEM

Your vehicle may be equipped with an onboard telematics system.  This 

system is a Global Positioning Satellite (GPS) linked computer.  It receives 

input from multiple sources to locate your vehicle.  Read and understand 

the Supplemental Telematics and Navigation System Owner’s Manual 

and observe the Warnings, Cautions, and Notes that follow before using 

the system.

Verify legal weight and height restrictions for the route suggested by 

the telematic system.  Failure to verify height restrictions could lead 
to an accident causing death, personal injury or property damage.  

Failure to verify weight restrictions could result in a traffic infraction.
Only glance at the system monitor while driving.  Prolonged periods 

of viewing while driving could result in an accident involving death 
or personal injury.

Do not program the telematic system while driving.  Always stop your 
vehicle when programming or changing the settings on the telematic 
system.  Programming the system while driving can cause you to take 

your eyes off the road, which could result in an accident involving 

death, personal injury or equipment damage.

Regardless of how and where the navigation system directs you, it is 
your responsibility to operate the vehicle in a safe and legal manner. 
Failure to comply may result in death, personal injury, equipment or 
property damage.

Ensure the volume level of all audio devices is set to a level that still 

allows you to hear outside traffic and emergency vehicles.  Failure to 

comply may result in death, personal injury, equipment or property 
damage.

Do not rely on the telematic system to route you to the closest emergency 
services.  Not all emergency services are in the database.

The map database is the most current available at the time of production. 

The database is designed to provide you with route suggestions and 

does not take into account the relative safety of a suggested route or of 

factors that may affect the time required to reach your destination.  

See the 

Supplemental Navigation System Owner’s Manual for more information

.

Summary of Contents for T410



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for T410

Magliner HRK Assembly Instructions Manual preview
HRK
Brand: Magliner Pages: 7
Vestil PM2-3344-SLP Instruction Manual preview
PM2-3344-SLP
Brand: Vestil Pages: 6
Vestil CARPET-45 Instruction Manual preview
CARPET-45
Brand: Vestil Pages: 5

Brands by name

Popular brands

Load more brands