1. Introduction - About this manual
This document contains general installation, configuration and operation instructions for installing Kentix
products.
The installation is explained by topologies, quick manuals and important points. The devices are connected via
Plug&Play via network (PoE) or power plugs respectively.
If further steps for installation are necessary, e.g. DoorLock components, these will be explained in detail.
Follow the overview in the table of contents.
Configuration
This Manual explains required points for commissioning Kentix products.
Further information or hints and explanations respectively to certain configuration points can also be found on
the Web Interface of the respective device.
Page (07-2018, subject to change)
kentix.com
6
