3.4. Alarm-inputs
When installing the device follow the instructions in this manual. Please note polarity and technical data of the
inputs.
3.5. Switching outputs
When installing the device follow the instructions listed in this manual.
Connected devices must installed properly following the specifications in this manual. Pay particular attention to
the allowed supply voltages and services for the various consumers in the technical data-sheet.
3.6. Power supply
The devices are power supplied via PoE or with a DC voltage between 10-32VDC. Use only recommended
power supplies or listed power supplies in this document. The polarity of the cable must not be interchanged.
Example 1: Power supply of one MultiSensor via the system jack of the AlarmManager
Example 2: Power supply of two MultiSensors via Power Adapter (KIO1) and plug power supply
Electronic equipment is not domestic waste - in accordance with directive 2002/96/EC OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL dated 27th January 2003 concerning used electrical
and electronic appliances, it must be disposed of properly. At the end of its service life, take this unit for
disposal at a designated public collection point.
Spent batteries are special waste!
Do not throw spent batteries into your domestic waste; take them to a collection point for spent batteries.
The products complies with applicable European standards and directives and is confirmed by the CE
mark.
The CE conformity declaration is available on request.
Page
(07-2018, subject to change)
kentix.com
10
