5.13. System
5.13.1.
Logbook
Regardless of the event log, all messages relevant to the functionality of the Kentix system are stored here. The
logbook contains, for example, messages about log-on to the AlarmManager, configuration changes and alarm
notification messages.
With the help of the logbook eventual misconfiguration can be retraced.
5.13.2.
System functions
In the section System functions a backup of the configuration can be created and restored.
In addition, a firmware update can be performed here.
Firmware updates are available for download on the Kentix website. A description of how to perform firmware
updates can be found later in this manual.
5.13.3.
License management
Basically there are two versions of the AlarmManager - AlarmManager-BASIC and AlarmManager-PRO. The
devices are identical on the hardware side. A license key defines the respective device variant. An
AlarmManager-BASIC can be converted to an AlarmManager-PRO by entering a license key to extend the
functionality if required.
For information on the scope of functions or differentiation of the two device types, go to
.
5.13.4.
Wireless settings (ZigBee)
This section displays information about the current ZigBee wireless network. In addition, the radio channel can
be changed here and the radio network can be reset.
5.13.5.
SD card
To record video images in case of an alarm, a SD card must be inserted in the AlarmManager.
The card is automatically recognized after insertion and can be formatted here if required. A previous deletion or
adjustment of the file system is not required. SD cards with a memory size of up to 128 gigabytes can be used.
Page
(07-2018, subject to change)
kentix.com
24
Al
a
rmMa
n
a
g
e
r
Sm
a
rt
Mo
n
ito
ri
n
g
NOTE!
If the radio channel is changed, it may be necessary to re-teach some sensors.
When the radio network is reset, re-teaching of all wireless sensors connected to the AlarmManager is necessary.
