Tampering
For the tampering detection the MultiSensor-Door is eqiupped with a „tilt-sensor“.
This sensor reacts on the change of the sensors angle/orientation - by removing and tilt of the sensor.
Please note that the tilt-sensor will only operate properly if it is installed vertically and not on moving parts (door
leaf / window leaf).
6.7.6. Test of the settings
The alarming function of the MultiSensor-Door can be tested by simply opening/closing door or window. This will
trigger a direct update of the sensors open/closed state.
NOTE!
To test the alarming of MultiSensor-Door the sensor has to switch to armed state.
After the arming this can take up to 5 minutes. There will be no alarm triggering before.
Page
(07-2018, subject to change)
kentix.com
39
Mu
lti
Se
n
so
rs
Sm
a
rt
Mo
n
ito
ri
n
g
