10.5.4.5. Smartmeter - General
Transmission cycle (Sec)
Sets the transmission cycle of the smartmeter in seconds.
Connection timeout (Sec)
Sets the time interval for a connection timeout. If a smartmeter has not sent data to the PowerManager within
this time, the device will be marked in the Dashboard with an interrupted connection.
Sending reports
This option enables an automatic monthly report with consumption data that is sent to all users who have an e-
mail address enabled.
10.5.4.6. User
Here, users can be added and managed. Up to 1,000 users per system can be configured.
User name
Assign a unique user name for the user. This is required to log in to the PowerManager and may only be used
once in the system.
Full Name
As a supplement to the user name, the full name of the user must be entered here. This has no function for the
operation of the system.
User password
All users who should have access to the PowerManager require a login user password in addition to the user
name.
E-mail address
If an e-mail address is stored, the user is informed about critical system states - e.g. Threshold exceeded for
current or voltage informed.
Description
Enter a description for the respective user, if required.
System permissions - user level
Users have 2 permission levels to choose from:
"Display only" allows you to log in to the system for viewing the dashboard.
"Super Administrator" allows full access to the PowerManager.
System permissions - receive notifications
Defines whether the user should be informed about critical system states.
Page
(07-2018, subject to change)
kentix.com
98
NOTICE!
The values set here for transmission cycle and connection timeout are based on empirical values.
Changing the values can lead to failures or connection interruptions.
Sm
a
rt
Me
te
ri
n
g
