For the installation of a Kentix online cabinet lock please proceed as described in the following:
Step 1: Drilling
To fix the cabinet lock holes are required in the door as shown in the following drawing.
Step 2: Setting of the opening direction
The levers rotation direction is determined by the position of the small screw at the mounting thread.
Screw at the side of the mounting thread. Opening by turning the lever to the left.
Page
(07-2018, subject to change)
kentix.com
66
NOTE!
Depending on the type of cabinet, a drilling at the door is not required. For cabinets that already have an
opening after the removal of the existing closing lever, matching profiles for the inside of the door are
included.
O
n
lin
e
ca
b
in
e
t
lo
ck
Sm
a
rt
A
c
c
e
s
s
