5.9. Configuration - Dashboard / Logbook / Time profiles
Below the steps vor configuring the Kentix System via the AlarmManager are described.
For this purpose, the dashboard contains operating elements for editing sensors and alarm zones and operating
the system.
5.9.1.
Add / edit MultiSensors
New MultiSensors can be added via „+“ in the alarm zone heading.
After selection, a list of all possible sensors for the system appears.
MultiSensor RF / Door and KeyPad-Touch must be assigned directly to the respective device (AlarmManager or
MultiSensor-LAN-RF) during this process. For all other devices this is not necessary. Here, the assignment to
an alarm zone suffices. The procedure for adding new sensors can be found in the description of the respective
device later in this manual.
Page
(07-2018, subject to change)
kentix.com
17
IMPORTANT!
Please note the respective device type. An AlarmManager BASIC supports only wireless sensors, cameras
and the server Live check.
Al
a
rmMa
n
a
g
e
r
Sm
a
rt
Mo
n
ito
ri
n
g
add building / alarm zone
general system state
add sensors
edit sensor settings
edit building / alarm zone
