Kemper Champion C 1200, Operating Manual

Page: 12 / 59

9 Technical Data C 1200
Technical Data
Length m: 2.80
Width m: 1.76
Height in working position m: 3.95
Weight kg: 1100
Pto speed rpm: 1000
Power requirement kW/HP: min.: 50/70; max.: 110/150
Row interval cm: row-independent
Working width m: 1.25
Chopped lengths mm: 5 – 7.5 – 10 – 15 – 20 – 30
Mounting facility
The CHAMPION C 1200 can be operated by conventional tractors and by system
tractors as well. Hitch options are the combined REAR and SIDE MOUNTING and
FRONT MOUNTING. The new drive system allows any of these three options to be used
by swinging the divided transmission system into the desired position.
Equipment required on the tractor
1. Max. 110 kW (150 HP). A higher use of power will void guarantee.
2. 12 V connector
3. one double acting steering valve
4. 1000 rpm PTO
5. Standard PTO connection 1 3/8”
– 6 No. 40496
Optional PTO connection 1 3/8” – 21 No. 59025
Optional PTO connection 1 3/4” – 6 No. 63254
Optional PTO connection 1 3/4”– 21 No. 63255
PTO
The main PTO shaft W 2400 is equipped wit ha slip clutch FK 96/4 (M = 1350 Nm). The
REAR and SIDE mounting versions have a clockwise free run and th e FRONT version
is equipped with an anti clockwise free running clutch.
Optional equipment – Chapter 8
A. Height adjustable rh support wheel (PN 64305), recommended for light tractors
and when SIDE MOUNTING is selected.
B. Height adjustable lh support wheel (PN 68040), recommended for FRONT
MOUNTING in combination with the rh support wheel
C. Stalk lifter, movable in height (PN 63036), for down crops
D. Fixed stalk lifter tips for down crops (PN 69195), 2 Pcs. per set
E. Mechanically driven stalk divider (PN 65960)
F. Additional discharge chute extension (1 m) (PN 64652)
G. V-belt pulleys for 4 mm chop length (PN 65975 & 65977)