Kemper Champion C 1200, Operating Manual

Page: 31 / 59

32 Grinding of blades
C1200
In order to achieve the best possible chopping quality at a low force, you must
regularly sharpen the blades. This should be done several times a day.
Operation of the sharpening device
Start the machine; engage the PTO shaft
and let it run at a speed of approx.
580
rpm;
Release the protective cover.
Lock the cover and secure it against
inadvertent release.
Remove the lock nut from the
sharpening device.
Turn the manual handle in the direction
of the chopping wheel until the blades
touch the sharpening device. Complete
another 1/2 rotation of the handle, thus
pressing the grinding disk against the
blades.
Important!
Ensure that the grinding disk rotates
with the blades during grinding!
Adjust the speed! The faster the
blades rotate, the higher the abrasive
effect of the grinding disk!
After completion of the grinding process:
- Turn the handle to remove the
grinding disk from the blades.
- Lock the sharpening device with the
lock nut.
- Close the protective cover and
secure it.