Kemper Champion C 1200, Operating Manual

Page: 33 / 59

32 Grinding of blades
C1200
Using your right hand, turn the chopping
wheel in a clockwise direction until it
touches the opposite edges.
Turn the chopping wheel back to the next
position in which the lock spring can be
engaged in the groove of the nut.
The blade wheel may not touch the
counter-edge.
If necessary, repeat the above adjusting
procedure, check the counter-edge and
set the blade wheel back by one groove.
The blades can be adjusted by means of
the oblong holes so that a uniform
distance to the counter-edge can be
achieved.
Caution: observe correct
tightening torques!