Kemper Champion C 1200, Operating Manual

Page: 38 / 59

32.1 Inspection and adjustment of opposite cutting edge
Blade rotor & smooth roller
C1200
Proceed with great caution
when opening the channel
Ensure that the machine is aligned in a
horizontal position when attached in
order to prevent the header opening
inadvertently.
Secure the channel flap in its opened
position.
In order to increase the swivelling angle,
move the forage harvester from the front
or rear position to the side.
First disconnect
the drive shaft from the
variable-speed transmission.
Opening of drum housing
To open the drum housing by swivelling it
from the pre-compression roller housing,
first install the top belt and pulley.
Remove the tension spring from the
drum drive unit. When removing the
tension spring hold it with an assembly
rod, and then loosen the nuts. When
reinstalling the spring, also use the
assembly rod.
Strippers of
smooth roller
Counter-
edge of
blade wheel
Secure flap
in open
position