24 Attachment options
C1200
Turning of header
Turning header to change from rear to
side attachment
The header is kept in its position by
means of a keyed joint. To swivel the
header to change its mounting position
or for maintenance work, remove the
key.
Position of securing key and stop for side
mounting.
Position of securing key and stop for
front and rear mounting.
Adjust the stops so that
- the drives are aligned and
- the securing key is properly
inserted.
Caution
It is forbidden to stand in the swivelling range of the machine. Before
swivelling the machine, ensure that the machine is attached in a
horizontal position. Otherwise, the machine might swivel due to its
own weight when the securing key is removed. Special care is
required when swivelling the attachment while the machine is
standing on a slope.
Stop
Securing key
Securing key
Stop
Stop
Summary of Contents for Champion C 1200
