Kemper Champion C 1200, Operating Manual

Page: 36 / 59

32.1 Inspection and adjustment of opposite cutting edge
Blade rotor & smooth roller
C1200
Testing of counter-edge
The counter-edge can be visually
inspected through the housing of the
blade wheel.
For this purpose, the blade wheel
housing can be opened upwards.
Replacement and adjustment
of counter-edge
To adjust and replace the counter-edge,
open the housing of the pre-compression
rollers.
In order to be able to increase the
opening angle of the pre-compression
channel, remove the jockey wheel.
.
First release the belt and then remove
from the cutting rotor. The tension spring
can be released by moving the lever.
To release the lever, loosen the size 12
hexagon nut.
Remove drive
shaft
Loosen size 12
nuts, remove
belt