Keba ServoOne Series, Operation Manual

Page: 60 / 92

Operation Manual ServoOne Supply Unit
60
ID no.: 1101.21B.6-00 Date: 04/2020
= selected setting/component
Connections Terminals Terminal identifier Cable type
Control supply X9/10 +24 V DC / pin 1 = + , pin 2 = – Standard
Precharging/mains
synchronisation, auxiliary
relay
X21
L1/L2/L3 (400/460/480 V
AC
)
HREL
Standard
shielded
Mains supply X12 L1/L2/L3/PE (400/460/480 V
AC
)
Standard
shielded
See chap. 4.3, p. 33
Table 5.1 Power supply
Connection Socket Designation Cable type
USB X2 USB A CC-USB 03
TCP / IP (Ethernet) X3 RJ45
Commercially
available cross
link cable Cat
5e/ shielded
or better
Table 5.2 Communication with the PC with user software DriveManager 5
Connection Terminals Terminal identifier Cable type
+24 V DC X4/22 ISDSH
Standard
shielded
ENPO (Start) X4/10 ENPO
Standard
shielded
See chap. 4.9, p. 51
Table 5.3 Communication via terminals
5.2.1 System requirements
y
Supply unit installed.
You will find details on initial commissioning in chap. 5.2.2, p. 60
y
Completion of the work in chap. 4 "Electrical installation" and chap. 3 "Starting
DriveManager 5" in the Installation Manual DriveManager 5
y
Connection between PC and ServoOne supply unit (Ethernet or USB)
NOTe:
During commissioning, please follow the safety instructions in chap. 2
5.2.2 Wiring the components
1.
For complete wiring the cable connections, the communication and service connections must be
connected using the related cables and wires at the terminals provided for this purpose.
Pay attention to adequate shielding.
Commissioning