Keba ServoOne Series, Operation Manual

Page: 84 / 92

Operation Manual ServoOne Supply Unit
84
ID no.: 1101.21B.6-00 Date: 04/2020
A.9 Technical data, mains filter
For size BG5 BG6a
For device SO84.040.S SO84.076.S SO84.115.S SO84.170.S
Type
FFU 3 x 56 K FFU 3 x 80 K FFU 3 x 130 K FFU 3 x 180 K
Rated AC current 1) 3 x 56 Aeff 3 x 80 Aeff 3 x 130 Aeff 3 x 180 Aeff
Supply voltage 3 x 400 VAC ... 3 x 480 VAC
Degree of protection IP20
Power connections (L1,L2,L3)
Max. cable cross-section for
the terminals
16 mm
2
25 mm
2
50 mm 2 95 mm 2
Tightening torque
2 Nm 4 Nm
6 Nm 15 Nm
Protective earth conductor connections (PE)
Thread
M6
M10
Tightening torque
6 ... 8 Nm
15...20 Nm
1) Rated AC current at 40 °C ambient temperature
Table A.22 Connections, mains filter for BG5 and BG6a
For size BG7
For device SO84.375.S SO84.540.S
Type FN 3359-400-99 FN 3359-600-99
Rated AC current
1)
3 x 438 Aeff 3 x 657 Aeff
Supply voltage 3 x 400 VAC ... 3 x 480 VAC
Connection Busbar
Protection IP 00
Power connections (L1,L2,L3)
Connection lug for ring cable lug Ø 10.5 mm
Tightening torque
The screw size and tightening torque depend on the ring cable lug
used.
Protective earth conductor connections (PE)
1) Rated AC current at 40 °C ambient temperature
Table A.23 Technical data, mains filter for BG7
For size BG7
For device SO84.375.S SO84.540.S
Rated AC current 3 x 375 A 3 x 540 A
Supply voltage 3 x 400 VAC ... 3 x 480 VAC 3 x 400 VAC ... 3 x 480 VAC
Power dissipation at 100 % duty factor 280 W 525 W
Frequency 50/60 Hz 50/60 Hz
Connection to copper straps Cable lug Cable lug
Protection IP00, installation in a switch cabinet necessary
Installation position
Capacitors with viscous filling must be installed upright with
terminals pointing upward.
Power connections
Connection lug for
ring cable lug
Ø 13
mm
2
Screws for ring cable lug
The screw size and tightening torque depend on the ring cable lug
used.
Tightening torque
Table A.21 Technical data, input choke
Appendix