manualshive.com logo in svg

Keba ServoOne Series, Operation Manual

Share
Download
Keba ServoOne Series Operation Manual Download Page 5

Operation Manual  ServoOne Supply Unit

5

ID no.: 1101.21B.6-00 Date: 04/2020

Glossary ...............................................................................................87

5.2.10 

Switching on mains supply voltage ............................................................65

5.2.11 

Switching on regulation .............................................................................65

5.3 Diagnostics ...............................................................................................................65

5.3.1 

Malfunctions and warnings in DriveManager 5 ..........................................65

5.4  Integrated control unit ..............................................................................................66

5.4.1 

Function of buttons T1 and T2 ...................................................................67

5.4.2 Display .......................................................................................................67

5.4.3 

Parameter menu (PA) .................................................................................68

5.4.4 

Ethernet IP address menu (IP) .....................................................................68

5.4.5 

Field bus address menu (Fb) .......................................................................69

6 Diagnostics ...................................................................................71

6.1 

Device states .............................................................................................................71

6.1.1 Errors .........................................................................................................71

6.2  Error list ....................................................................................................................72

A Appendix ......................................................................................75

A.1  Technical data, supply unit ........................................................................................75

A.2  Current required for the control supply .....................................................................79

A.3  Pre-assembled connection cables ..............................................................................79

A.4  Hydrological data for the liquid cooling .....................................................................80

A.5  Dynamic temperature monitoring .............................................................................80

A.6  Ambient conditions ...................................................................................................81

A.7  Technical data, step-up choke ...................................................................................82

A.8  Technical data, input choke .......................................................................................83

A.9  Technical data, mains filter ........................................................................................84

A.10  Technical data, mains fuse.........................................................................................84

A.11  Technical data, mains contactor ................................................................................85

A.12  Technical data, circuit breaker ...................................................................................85

A.13  UL certification ..........................................................................................................86

Table of contents

Summary of Contents for ServoOne Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands