Kato SR-300L, Instruction Manual

Page: 182 / 233

- 166 -
16-6-2 Hook stowing procedure
(611A-0039-0E)
(1) Extend the four outriggers to the intermediate extension position
or more and confirm that the ACS display matches the actual
outrigger status.
(2) Set the ACS working status to "jib setting".
・ Always refer to the separate "ACS instruction manual" for ACS operation.
・ When "jib setting" is set to the ACS, the overhoisting detector is disabled, so work with extra
attention to the position of the hook.
(541A-0189-1E)
(3) Fully retract the boom and move the hook so it is directly above
the fixing ring.
(4) Lower the winch so that the hook can be hooked into the fixing ring.
Take care that the hook does not touch the cab.
(491A-0057-0E)
(5) Hook the hook into the hook fixing ring.