Kato SR-300L, Instruction Manual

Page: 220 / 233

- 203 -
Part
Inspection location
and service task
Task
Wh
en
de
fe
ctive
Engine
Inspection procedure Notes
Before
start
After
start
Engine
-re
late
d
Accelera
tor
Pedal slack and play Inspect ○
・ Af ter starting the engine, depress the
accelerator pedal and check the following. If
you notice anything abnormal, stop the engine
immediately and investigate the cause.
・ Does the engine rise smoothly to high
revolutions when you depress the accelerator
pedal ?
・ The accelerator doesn't rest before the engine
reaches high revolutions.
・ After the engine reaches high revolutions,
take your foot off the pedal to check whether
the engine speed declines smoothly.
Acceleration and deceleration
in response to pedal movement
Inspect ○
Hydrauli
c sy
stem-re
late
d
Oil reservoir Hydraulic oil
Check oil
level
○
Park the machine on the level ground in the
driving position and check the oil level from the
level gauge on the side of the oil reservoir.
The oil level changes with oil temperature, so
always check the oil level before you start the
engine.
With reference to the ambient air temperature,
check that the oil level is within the scale and
add more oil if the level is too low. Reservoir capacity:
400L
Cylinder
Oil leakage Inspect
○
Responsivity Inspect
○
Hydraulic pump
Oil leakage Inspect ○
Abnormal noise Inspect ○
Oil cooler
Oil leakage Inspect
○
Rotary seal Oil leakage Inspect ○
Hydraulic valve Oil leakage
Inspect ○
Sl
ewing-relate
d
Sl
ew
in
g
gea
r
Bearing
Abnormal noise on
slewing
Inspect ○
Slewing brake action Inspect
○
Move the slewing brake switch to the "brake"
side then check that the superstructure does not
slew even when you work the slewing control.
Wi
nc
h-
re
la
te
d
Hook
Attachment bolt Inspect ○
Check the hook for play, abnormal wear, screw
deformation, damage to the wire rope retainer,
opening of the key etc.
Bearing play Inspect
○
Sheave wear Inspect ○
Wire rope retainer Inspect ○
Hook Inspect ○
Protector attachment bolt
Inspect
○
30 ton hook
Wire rope Inspect ○
Drum lock Inspect ○
Operate the winch drum lock lever to check that
the lock device has locked securely.
Boo
m
-r
el
at
ed
Boom extension/retraction wire rope Inspect ○
Boom slide plates (upper, lower) Inspect ○
Sheave Inspect
○
Check that the groove depth is less than 37mm.
Check that there is no play, crack and damage.