Kato SR-300L, Instruction Manual

Page: 109 / 233

- 95 -
(11) Return the suspension from locked to free state. The procedure for returning the suspension to the free state is as
follows.
① Move the shift lever to the "N" position.
②
Check that the suspension operation OK indicator lamp is lit.
③
Push the suspension lock/release switch to the lock release side to extend the suspension cylinders to the
position required for driving.
The machine should be on the firm level ground for suspension operation.
(541A-0130-0E)
(12) Check that no warning lamps are lit.
(13) Check that the turn signal lamps flash correctly.
(14) Check that the foot brake operates and that the brake lamps lights.
(15) Check that the crane working lamps are not lit.
(16) Check that each lamp etc. lights.
(17) Check that the needle of the engine water temperature gauge is above point "C".
(18) Check that the covers of the engine, toolbox and outrigger control panel are closed and locked.