Kato SR-300L, Instruction Manual

Page: 162 / 233

- 146 -
15-4 Lower control switch panel
(541A-0169-2E)
(1) Outrigger control panel
Refer to the "Outrigger operation" section.
・
When you operate the switches on the outrigger control panel, the ACS outrigger setting status
will be canceled and the ACS will switch to the "working status setting screen".
・
When you have used the outrigger control switches, insert the outrigger stopper pins and
check the outrigger extension widths and check that all four outriggers are in the positions
indicated on the ACS display, then press the ACS setting switch to rest the outrigger extension
widths.
If it is not reset on the ACS, the crane cannot be operated.
(491A-0043-1E)
(2) Outrigger emergency switch (self-rest type)
If the switches on the outrigger control panel fail to move the outriggers (when the multiplex communication error
warning lamp flashes etc.), switch the outrigger emergency switch to the "emergency" position then use the
switches on the outrigger control panel of the carrier as a temporary measure to stow the outriggers.
When you use the outrigger emergency switch to stow the outriggers, always set the crane to the
driving position.
(121A-0079-0E)