Kato SR-300L, Instruction Manual

Page: 223 / 233

- 206 -
Part
Inspection location
and service task
Task
Wh
en
de
fe
ctive
Engine
Inspection procedure Notes
Before
start
After
start
Ca
b-
con
trol a
nd
steering
systems
Cluster meter panel Inspect ○ ○
Check that the indicator lamps do not indicate
any problem. If there is any problem, you must
stop the engine and investigate the cause.
Switch panel
Check
action
○
Switch the starter switch "ON" and check that all
indicator lamps on the switch panel light and the
buzzer sounds for around three seconds. The
buzzer should then stop and normal operation
start. Check that no error numbers appear on the
digital display. The numbers on the digital
display depend on the model and specification. If
the multiplex communication error warning
lamp flushes and an intermittent buzzer sounds,
do not start the engine and contact your
authorised KATO dealer.
Action of the door and cover locks Inspect
○
Cra
ne s
af
et
y devic
es ACS
Inspect ○
The ACS automatically switches to the "working
status setting screen" when the engine has started
and the PTO switch is switched on.
If any problem is indicated while the "working
status setting screen" is displayed, investigate the
cause of the problem before you start work.
You must also make a "preoperational check" as
described in the separate instruction manual for
the ACS.
Overhoisting
detector
Buzzer Inspect ○
Lift the weight of the overhoisting detector and
check that the warning buzzer in the cab sounds
and the crane stops automatically.
At the same time, check the condition of the
ropes of the overhoisting detector weight and the
cord reel.
Automatic stop Inspect
○
(611A-0057-0E)