Kato SR-300L, Instruction Manual

Page: 173 / 233

- 157 -
16-4 Outrigger control panel
(121A-0027-0E)
(1) Control panel on the side of the lower structure
1) Extension/retraction switch (self-reset type)
Use this switch to extend or retract the horizontal or vertical cylinders.
2) Horizontal/vertical combined selection switch
Use to operate all the horizontal cylinders or all the vertical cylinders simultaneously. Move this switch to the
correct side for the cylinders you want to use.
When you select this switch and use the extension/retraction switch, the engine speed will increase automatically.
3) Horizontal/vertical individual selection switches
In order to operate each outrigger individually, select the relevant horizontal or vertical cylinder. When you
select the individual switch and use the extension/retraction switch, the engine speed will not increase.
1 Left-rear horizontal/vertical selection switch
2 Right-rear horizontal/vertical selection switch
3 Left-front horizontal/vertical selection switch
4 Right-front horizontal/vertical selection switch
・
When you operate the switches on the outrigger control panel, the ACS outrigger setting status
will be canceled and the ACS will switch to the "working status setting screen".
・ When you have used the outrigger control switches, insert the outrigger stopper pins and
check the outrigger extension widths and check that all four outriggers are in the positions
indicated on the ACS display, then press the ACS setting switch to reset the outrigger
extension widths.
If it is not reset on the ACS, the crane cannot be operated.
(511A-0080-0E)