Kato SR-300L, Instruction Manual

Page: 213 / 233

- 196 -
20-1 Pre-drive checks
(511A-0073-0E)
20-1-1 Pre-drive check sheet
(511A-0074-0E)
Inspection/servicing item
Daily
inspection
Inspection procedure Notes
Inspection location Inspection item
Before
start
After
start
St
ee
ri
ng
system
Steering wheel
Steerability ○
Others
Lubrication using
autogreaster and grease
quantity
○
Machine equipped
with autogreaster
Br
ak
in
g syst
em
Air pressure gauge Air pressure increase
○
The needle should normally be pointing between 5 and
9.
If the air pressure is 5 or below, check that it climbs
back to the 5
―
9 range when the engine is running.
If the air pressure climbs above 9, stop the engine
immediately and contact your authorised KATO dealer.
Brake pedal
Pedal stroke length
○
Excluding machines
equipped with air
brakes
Braking effect ○
Test the foot brake while the machine is moving very
slowly to check that the braking force is adequate and
applied evenly.
Parking brake Lever stroke length ○
Check the function of
the parking brake
switch.
Reserve tank Brake fluid level
○
Check that the brake fluid level is between the level
marks (LEVEL and MIN). If there is no external
leakage but the level has dropped, check the disk brake
pads for wear. If there is no problem with the brake
pads, add brake fluid.
Brake valve, quick
release valve, and relay
valve
Sound of brake valve
exhaust
○
Drive system
Tires
Air pressure ○
・ Check the tire pressure with a tire gauge while the
tires are still cool before driving anywhere. Adjust
the pressure as necessary to the rated pressure.
・ Check that there is no damage to the sidewalls and
no cracks or abnormal wear to the treads. Replace
any tires which have exposed canvas, regardless of
their age.
・ Check whether the treads are worn to the limit of use.
Also check for metal fragments, nails, stones and
other foreign bodies stuck into the treads or caught in
the tread grooves.
・ Check the depth of the tread grooves and look for
abnormal wear. Worn tires are dangerous as they
could burst or allow skidding.
・ Replace any tires where the limit of wear indicator is
visible.
・ There are six points at a depth of 1.6mm spaced
around the circumference of the tire which serve to
indicate when the limit of wear has been reached.
Air pressure: 900kPa
(9kgf/cm 2 )
Tire size:
385/95 R25
170E ROAD
Crack and damage ○
Abnormal wear
○
Tread groove depth ○
Wheels
Attachment status of disk
wheels
○
Loosening of wheel nuts
or bolts
○
Check that none of the wheel nuts is loose.
If any are loose, tighten them immediately to the
regulation torque. Tightening torque:
568
－
627N
・
m
(58
－
64kgf
・
m)
Suspen-
sio
n
Hydraulic suspension
Leveling and other
functionality
○
Elect
rical
system
Battery Battery fluid level ○
The battery electrolyte level should be between the
"UPPER" and "LOWER" levels.
If the level is at "LOWER" or below, top it up to the
"UPPER" level with battery electrolyte or distilled
water.