Kato SR-300L, Instruction Manual

Page: 221 / 233

- 204 -
Part
Inspection location
and service task
Task
Wh
en
de
fe
ctive
Engine
Inspection procedure Notes
Before
start
After
start
A
ir c
on
di
tio
ne
r
Heater Oil Inspect
○
Air conditioner
Cooling Inspect ○
Heating Inspect ○
Defroster Inspect
○
Refrigerant gas Inspect ○
Belt tension Inspect ○
Condenser Clean ○
Filter
Clean and
inspect
○
Replace ○
Drive-rela
ted
Tires
Air pressure Inspect ○
・
Check the tire pressure with a tire gauge while
the tires are still cool before driving anywhere.
Adjust the pressure as necessary to the rated
pressure.
・
Check that there is no damage to the sidewalls
and no cracks or abnormal wear to the treads.
Replace any tires which have exposed canvas,
regardless of their age.
・
Check whether the treads are worn to the limit
of use. Also check for metal fragments, nails,
stones and other foreign bodies stuck into the
treads or caught in the tread grooves.
・
Check the depth of the tread grooves and look
for abnormal wear. Worn tires are dangerous
as they could burst or allow skidding.
・
Replace any tires where the limit of wear
indicator is visible.
・
There are six points at a depth of 1.6mm
spaced around the circumference of the tire
which serve to indicate when the limit of wear
has been reached.
Air pressure: 900kPa
(9kgf/cm 2 )
Tire size:
385/95 R25
170E ROAD
Crack, damage,
abnormal wear
Inspect
○
Lodged metal
fragments, stones
etc.
Inspect ○
Wheel nut Inspect ○
Check that none of the wheel nuts is loose.
If any are loose, tighten them immediately to the
regulation torque. Tightening torque:
568
－ 627N ・ m
(58
－ 64kgf ・ m)
Br
ak
e-r
ela
te
d
Foot brake
Depression distance Inspect ○
Braking effect Inspect ○
Test the foot brake while the machine is moving
very slowly to check that the braking force is
adequate and applied evenly.
Brake fluid Inspect ○
Check that the brake fluid level is between the
level marks (LEVEL and MIN). If there is no
external leakage but the level has dropped, check
the disk brake pads for wear. If there is no
problem with the brake pads, add brake fluid.
Parking brake Braking effect Inspect ○
Air tank
Water
extraction
○
Maintain the air pressure in the air tank at the
rated level and pull the drain cock lever under
the air tank to drain any water that has
accumulated inside the tank. In winter, this water
can freeze and block pipes, so drain the water at
l e a s t t w i c e a d a y, n o t j u s t d u r i n g t h e
preoperational check.
Exhaust brake action Inspect
○
Apply the exhaust brake while the machine is
moving very slowly to check its action and that
each relevant indicator lamp lights.
Air drier Drain water Inspect ○