Kato SR-300L, Instruction Manual

Page: 76 / 233

- 62 -
10-2 Using the flare
(611A-0066-0E)
To use an emergency flare to signal danger in an emergency, such as when the machine breaks down on train tracks or
roads and cannot be moved, follow the instructions below.
(1) Remove the flare provided in the operation cab.
(2) Take the flare outside and twist it as it is removed from its case,
then insert it back into the case, facing the opposite direction.
(3) Ignite the flare by removing the end cap and rubbing the igniter
material on the cap against the tip of the flare, being careful to
hold them as far away as possible. When ignited, the flare will
emit a flame about 15 cm long.
(4) Once ignited, a flame is emitted for about 5 minutes.
・ Be sure to read the instructions indicated on the label affixed to the flare case before using a
flare.
・
The flare should be used within 4 years. Be sure to replace the flare with a new flare by the
"use by" date indicated on the label affixed to the flare case.
・
When igniting a flare, keep it away from your body, anyone nearby, and flammable materials.
When the flare ignites, it will emit a flame about 15 cm long.
・
Place the ignited flare away from flammable materials and at a location that provides other
motorists a safe stopping distance.
・ Do not use the flare inside a tunnel or other enclosed location. The smoke may impair
visibility.
・ Never let children or other unauthorized people touch the flare.
・
Only use the flare when necessary.
(541A-0074-0E)
NOTE
・ Use adequate caution when using the flare.
・
The flare is mounted on the left side of the operation cab.