Kato SR-300L, Instruction Manual

Page: 126 / 233

- 110 -
WARNING
(4) Do not put flammable items in the toolbox
Do not put aerosol spray cans, paint thinner, or other dangerous
combustibles in the toolbox.
They could cause a fire.
(5) Precautions when you get on and off the crane
・ Check that all guards and covers on the crane are fastened
correctly. If any is damaged, have it repaired immediately.
・
The floor, hand grips and steps can be slippery if there is mud,
oil or snow stuck to them, so wipe any of these away before you
start work.
・ It is dangerous to jump onto or off the crane. It is also dangerous
to hold onto the control levers, seat, control box or anything
other than the hand grips when you get on or off the crane.
When you get on or off the crane, face toward it and use the
hand grips and steps.
・
Getting on and off the crane while it is in motion is dangerous. Always wait until it is at rest.
(6) Perform crane preoperational checks
You should inspect the crane according to the preoperational
check procedure detailed in this manual. These checks ensure
safety and economy.
Before you start using the crane, thoroughly warm it up and
check the operation of the control levers without a load.
(7) Check ACS operation
Check the operation of the ACS according to the ACS
preoperational check procedure described in the instruction
manual which should always be kept in the cab.
(8) Check safety devices
In addition to the ACS, the crane is fitted with an overhoisting
detector and other safety devices which you should check
before starting work.