Kato REDGZM HD514MR-7, Instruction Manual

Page: 130 / 325

- 114 -
7. Monitor
(23) Replacement period
・
Displays the replacement period given typical operations.
・
Initial replacement period values are specified when shipped from the factory.
・
If the usage time is reset, the replacement period is automatically changed to the replacement period for
subsequent replacements.
Maintenance item
Replacement period (h)
Initial Thereafter
Engine oil 500 500
Swing gear oil 250/1000 1000
Traveling gear oil 500 1000
Hydraulic oil 5000 5000
Engine oil filter 500 500
Fuel pre-filter 500 500
Main fuel filter 500 500
Return filter 100 1000
Drain filter 100 1000
Pilot line filter 1000 1000
Air cleaner 1000 1000
Air breather 1000 1000
DEF filter 3000/4500 3000/4500
Service meter A
Not specified Not specified Service meter B
Service meter C
(T218341-026-0E)
The swing gear oil and DEF filter replacement periods vary depending on the model.
For the swing gear oil replacement period, refer to "3-4 Greasing chart". For DEF filter
replacement periods, refer to "4-1-5 DEF pump filter" and "4-1-6 DEF tank suction filter".
(T218341-027-0E)
・
The replacement period value can be changed by pressing the switch in the replacement period area.
However, a replacement period longer than the recommended period cannot be specified.
1) Replacement period display
Indicates when to replace the item.
2) Replacement period increase/decrease switches
The replacement period value can be changed.
3) Enter switch
Enters the specified replacement period value.
4) Return switch
Returns to the maintenance information screen without entering changes to the replacement period.