EN
27982_SAFETY LANYARD
The safety lanyard is the component of individual fall protection equipment intendent to protect
person against falls from a height.
•The safety lanyard can be used as an element of personal protective equipment against falls from
a height according to EN 354.
The subassembly consists of the safety lanyard connected to an energy absorber in accordance
with EN 355 and to a full body harness in
accordance with EN 361. It is attached to a permanent anchor point in accordance with EN 795 and
constitutes complete and essential user
protection against falls from a height. The lanyard alone can be used as the restraint lanyard.
•The safety lanyard can be used as an element of personal protective equipment for work positio-
ning and preventing falls from a height, according to
the standard EN 358 and as a work positioning lanyard.
LANYARD CONSTRUCTION
Adjustable lanyard is made of polyester 12 mm kernmantle rope, ended with loop equiped with
plastic thimble from the one side and loop with steel adjusting buckle from the second one.
LANYARD ADJUSTMENT
PERIODIC INSPECTIONS
The lanyard must be inspected at least once every 12 months from the date of first use.
Periodic inspections must be carried out by a competent person who has the knowledge and trai-
ning required for personal protective equipment periodic inspections. Depending upon the type and
environment of work, inspections may be needed to be carried out more frequently than once every
12 months.
Every periodic inspection must be recorded in the Identity Card of the equipment.
MAXIMUM LIFESPAN OF THE EQUIPMENT
The maximum lifespan of the lanyard is 10 years from the date of manufacture.
The lanyard must be withdrawn from use immediately and destroyed when it has been used to
arrest a fall or it fails to pass inspection or there are any doubt as to its reliability.
ATTENTION:
The lanyard maximum lifetime depends on the intensity of usage and the environment
of usage. Using the lanyard in rough environment,
marine environment, contact with sharp edges, exposure to extreme temperatures or agressive
substances, etc. can lead to the wthdrawal from use
even after one use.
SAFETY LANYARD
Date of manufacture: MM.RRRR
Serial number: XXXXXXX
EN 354:2010
Ref. 27982
DESCRIPTION OF MARKING
The CE mark and number of the notified body
responsible for performing the manufacturing process
inspection (art. 11)
manufacturer or distributor marking
LENGTH: 2,0 m
device type
reference number
lanyard serial number
month and year of manufacture
number and year of issuing
an European standards applicable for the lanyard
note: study the instruction before use
EN 358:2018
max. 140 kg
max. rated load for work positioning use
lanyard length
CORDINO DI POSIZIONAMENTO
N SERIALE:XXXXXXX
MESE E ANNO DI PRODUZIONE:MM/AAAA
EN 354:2010
Ref. 27982
DESCRIPTION OF MARKING
I
J
LUNGHEZZA: 2,0 m
A
B
D
E
F
H
EN 358:2018
max. 140 kg
G
C
Shortening
Lengthening
Loop with
thimble
Seam
Seam
Identity
label
Steel
adjusting
buckle
Polyester
kernmantle
rope
Maximal length up to 2,0 m