Kaiser KA 2005 Series, User Manual, Page: 20 / 84

20
EN
USAGE
Filling the tank with water
To fill the tank with water, you need
to:
•
Lift the cistern up and remove it
1 .
•
Open lid 2 and fill the tank with
fresh and clean water without
exceeding the MAX level.
•
Put the cistern back in, pressing
down slightly to open the valves
located at the bottom of the cis-
tern.
You can fill the tank without removing
it. Just pour water into the tank using
a different container of water.
Switching on the appliance for the
first time
Rinse the inside of the appliance be-
fore the first use.
•
Turn on the appliance by press-
ing the power button
4 . The de-
vice will perform a self-diagno-
sis, which will be accompanied
by the sequential flashing of
three buttons.
Lights 5 and 6 will flash to indicate
that the appliance is about to heat up.
At the end of this process, when the
lights stop flashing and start to light
evenly, the appliance will be ready for
flushing.
•
Install the filter holder on appli-
ance
7 .
1
2
4
5
6
7
Importantly!
Do not operate the appliance
without water in the tank or
without the tank.
Importantly!
Add water to the tank in a
timely manner if the level is
below the MIN mark.