K-sun Green Machine, User Manual

Page: 24 / 142

Getting Started
18
Preparation
1. Connecting the bundled AC adapter
Connect the AC adapter
Model AST1116Y1-1
that comes with your K-Sun
®
GREEN
MACHINE
®
to supply
power from the electrical outlet (AC120V).
2. Installing the batteries
Your K-Sun
®
GREEN MACHINE
®
also works with batteries when an electrical outlet is
not available. Six AA alkaline batteries or nickel-hydride rechargeable batteries (The
SANYO eneloop HR-3UTGA
or HR-3UTGB are
the only tested and approved rechargeable
batteries for
use in the K-Sun
®
GREEN MACHINE
®
.
Connect the bundled AC adapter to
the connector on your K-Sun
®
GREEN MACHINE
®
firmly, and
route the cord through the guide as
shown below.
* Be sure to connect the adapter as far
as it can go so as to supply power
steadily.
Plug the other end of the bundled
AC adapter into the electrical outlet.
•
Unplug the AC adapter from both the device and the outlet after use. This may prevent
possible accidents caused by tripping over the cord.
•
When handling the AC adapter cord, be sure not to pull it forcibly or bend it repeatedly.
This may break the cord.
•
The safety feature of the device may cut the circuit of the AC adapter when the plug
shorts out or on other occasions.
•
K-Sun
®
GREEN MACHINE
®
warranty does not apply to the AC adapter.
Remove the battery cover.
Take off the cover while releasing the tab.
1
2
1
Be sure to turn off the power before installing
the batteries.
18
Getting Started