K-sun Green Machine User Manual Download Page 112

Page: 112 / 142

106

Additional Functions

Resetting

Press

key and turn the power off.

Press

key.

"Reset" will be displayed. Once the machine is reset the selected length unit will be
displayed, the text enter screen appears.

If the machine does not turn off when pressing

key, unplug the AC adapter and remove

the batteries. Plug the AC Adapter again or install the batteries and press

key again.

Power is restored.

Press

key while holding down

key

and

key.

A message reading "Reset?" blinks.

•

To abort resetting process press any key except for

key.

•

Please be noted that the saved files and various data will be deleted once you reset the

device.

Summary of Contents for Green Machine















































































































































Search results

Summary of Contents for Green Machine

Reviews:

Related manuals for Green Machine

Brands by name

Popular brands

K-sun Green Machine, User Manual

Search results

Summary of Contents for Green Machine

Reviews:

Related manuals for Green Machine

Brands by name

Popular brands