K-sun Green Machine User Manual Download Page 87

Page: 87 / 142

Additional Functions

: Enlarging a label 3 times and printing it.

Once the text is entered press

keys.
The "Extra Print" menu will be
displayed.

Select "Enlarge print" and press

key.

The "Enlarge" menu will be displayed.

Select "

3 size" and press

key.

The "Enlarge 3" menu will be displayed.

Select "3/3" and press

key.

"3/3" is selected and the "Extra Print"
menu will be displayed again.

Select "Execute?" and press

key.

The 3 sections of the label set are
printed.

Assemble the tape.

Cut off the edges with a cutter and
assemble the letters.

Ex.

Size

Extra print can only be executed by

selecting "Execute?" from the "Extra Print"

menu. Pressing

key will execute

normal printing.

Summary of Contents for Green Machine















































































































































Search results

Summary of Contents for Green Machine

Reviews:

Related manuals for Green Machine

Brands by name

Popular brands

K-sun Green Machine, User Manual

Search results

Summary of Contents for Green Machine

Reviews:

Related manuals for Green Machine

Brands by name

Popular brands