K-sun Green Machine, User Manual

Page: 119 / 142

Appendix
113
Appendix
113
Nothing is printed when
pressing
key
●
Is text entered?
Nothing is printed when there is no text in
the text enter screen or in a fixed form.
●
Is there any message on display?
Printing is not carried out when an error
message is displayed on the display.
See "Messages On the Display"
(p.110) .
Please wait for a second when a message;
"Wait" is displayed.
●
Is the tape cartridge installed
correctly?
You cannot print when there is no
remaining tape in the tape cartridge or
when the top cover is not closed
properly.Install a tape cartridge and close
the top cover firmly.
See "Installing tape cartridges"
(p.
21
).
●
Is the PeelGuard
®
operating?
You cannot print
while using the
®
PeelGuard® trimmer
Text is not printed
properly
●
Is the tape cartridge installed
correctly?
Remove the tape cartridge and reinstall it
again following the correct procedure.
See "Installing tape cartridges"
(p.26) .
●
Is the printhead free from dirt?
Printing becomes faint when dirt or dust
adheres to the printhead. Rub the
printhead with a cotton swab moistened
with medical alcohol (
isopropyl
) available
in
the market.
®
)
●
Has the batteries run out?
When the batteries are running out,
"Change Batteries" appears on the display.
Replace all the batteries with new AA
alkaline batteries immediately or connect
the AC adapter that comes with the device,
otherwise the K-Sun
®
GREEN MACHINE
®
may turn off in the middle of the operation
or during printing.
See "Setting battery type" (p.102).
The printed label is not
cut automatically
●
Is the auto-cutter feature disabled?
The printed label is not cut automatically
when the auto-cutter feature is disabled.
See "Turning "Autocut" Off to
Print" (p.87) .
●
Is the blade worn out?
When you use the PeelGuard
®
over the
long term, the blade of the PeelGuard
®
becomes blunt. To replace the blade,
consult the local dealer or our customer
center. Replacement is performed at your
expense.
A faint streaking