K-sun Green Machine User Manual Download Page 17

Page: 17 / 142

Getting Started

K-Sun

GREEN MACHINE

Keys

(Print)

Prints the text you entered on the tape,
and cuts the tape automatically.

See

p.37

(= Feed/Cut)

Feeds the tape 0.7", or cuts the tape.

See

p.24

(Extra print)

Performs repeat printing, enlarge printing
or mirror printing.

See

p.79

(= Print setting)

Sets the auto-cutter or the print density.

See

p.86

(Graphic)

Shows the preview of the label by
scrolling the whole image.

See

p.36

(=Preview)

Shows the preview of the printout.

(Telecom/Electrical Label Mode)

Enters the Telecom/Electrical Label Mode.

See

p.52

(Language)

Specifies the language to be used for the
display.

See

p.17

(= English)

Switches the display language to
English.

(Edit)

Specifies Length, Frame & Table, Margin
and the other edit settings.

See

p.59

(= Condition)

Specifies battery type and the units to be
used for the display. Changes the stored
settings.

See

p.101

The functions of each key are described below. To perform the operation indicated by

, hold down the

key and press the specified key.

Getting Started

Summary of Contents for Green Machine















































































































































Search results

Summary of Contents for Green Machine

Reviews:

Related manuals for Green Machine

Brands by name

Popular brands

K-sun Green Machine, User Manual

Search results

Summary of Contents for Green Machine

Reviews:

Related manuals for Green Machine

Brands by name

Popular brands