K-sun Green Machine User Manual Download Page 83

Page: 83 / 142

Additional Functions

: Printing an "ITF" bar code (Width = Large, Ratio = 3.0, C/D on)

Press

key while holding down

key .

Select "ITF" and press

key.

The "Width" menu will be displayed.

Select "Large" and press

key.

The "Ratio" menu will be displayed.

Select "3.0" and press

key.

The "Check Digit" menu will be
displayed.

Select "On" and press

key.

The bar code number input screen will be
displayed.

Enter the bar code number using
the character keys.

The number will be displayed.
The check digit is automatically
displayed in the shaded field in the right
upper corner. The digit numbers that
can be entered depend on the type of
bar code.

Press

key.

The text enter screen will be displayed
again. The bar code mark "

" will be

displayed in the position of the cursor.

Press

key.

The bar code label is printed.

Ex.

Summary of Contents for Green Machine















































































































































Search results

Summary of Contents for Green Machine

Reviews:

Related manuals for Green Machine

Brands by name

Popular brands

K-sun Green Machine, User Manual

Search results

Summary of Contents for Green Machine

Reviews:

Related manuals for Green Machine

Brands by name

Popular brands