K-sun Green Machine, User Manual

Page: 59 / 142

Telecom/Electrical Label Mode
53
Panel B
For use when printing equal text data and you need to sequence either a number or
letter in the label. Note: only one sequence of either number or letter is possible.
For this example we are going to sequence numbers.
Choose a 9mm, 209, 3/8” tape.
Choose Patch Panel B, Return.
Choose 1”, Return.
At Label 1 type A , then press Sequence key.
On Start choose 1, Return.
Repetition: This feature allows you to print more than one label but for this example
we will choose 1 time, Return.
Sequence 2 Figure: The feature adds the space, so as you sequence two digits the
spacing will accommodate two digits. For this example, leave On, and then Return.
Now press the Extra button and choose Repeat print, Return.
At Set number, Return and enter 12, Return.
Now arrow down to Print exec?, Return.
There are many additional options and choices to enhance your label presentation.
When creating your label you can add a pictograph or symbol (graphic illustrations
on pages 121-124) to help communicate information. Before sequencing, you can
add or change features such as borders, size of letters and/or numbers (small to
wide), font type, etc. … Just press Edit to review your choice selection. Use Preview
to review before printing.
52
Telecom/Electrical Label Mode
Telecom/Electrical Label Mode
The Telecom/Electrical Label Mode has three functional modes (Patch Panel, Wrap,
Flag) that allow you to easily create labels to be attached to a round-shaped material
such as a cable, wire, and tube, and to neatly label panels, power strips and other
communication equipment. You can easily access any one of the functions by just
pressing the corresponding key.
The following describes the feature of each functional mode.
●
Mode of "Patch Panel"
You can print multiple words in a single label specifying a space between the words.
Patchpanel A
: For attaching to a 3-outlet power strip.
Length: specify the interval between the outlets.
Label1-Label3: enters "TV","VIDEO",and "DVD".
With the specified length spaced, the three words will be printed on a single label.
Patchpanel B
: For attaching to a 3-outlet power strip.
Label1: enters "VIDEO-sequence numbers".
Press key and enters sequence numbers.
See "Printing sequence numbers" (p.74).
Press key and enters "3" as "Repeat print".
See "Prints the same label continuously (Repeat)" (p.83).
Ex.
Ex.
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12
←
←
←
←
←
←
←
←
←