JVC MP-XV841 Instructions Manual Download Page 83

Page: 83 / 232

Continue to next page

Adding or Removing a Memory Board

If you have operated your PC, its inside may be hot and you may get a burn. Turn the power
switch off and wait for the PC to cool down.

1. Turn the PC Power switch off, and disconnect AC adapter from your PC. Then,

remove the lithium-ion battery pack (if any) and all other peripherals from your
PC.

2. Remove the lithium-ion battery pack and the memory expansion cover by taking

the following steps.

1) Turn your PC upside down, and remove screws

2) Open the memory expansion cover.
3) Remove the lithium-ion battery pack in the arrow direction.

Caution

Do not loosen any other screws, otherwise, your PC may fail.

3. Discharge any static electricity from your body by touching something metallic

nearby. (Not on the PC)

4. Add or remove a memory board.

Caution

Add the 512M-byte memory board to expand the PC’s memory capacity of the MP-XV841US
to the maximum 768M-bytes. Refer to page 84 for the procedure to mount and remove the
memory board.

Open the memory

expansion cover.

Remove the battery

pack by sliding it in
this direction.

XP841US̲070̲087.p7.0J

04.5.21, 6:30 PM

Summary of Contents for MP-XV841









































































































































































































































Search results

Summary of Contents for MP-XV841

Reviews:

Related manuals for MP-XV841

Brands by name

Popular brands

JVC MP-XV841, Instructions Manual

Search results

Summary of Contents for MP-XV841

Reviews:

Related manuals for MP-XV841

Brands by name

Popular brands