manualshive.com logo in svg

JVC MP-XV841, Instructions Manual, Page: 132 / 232

Share
Download
JVC MP-XV841 Instructions Manual Download Page 132

16

 EN

2.  Open the display panel

1

Slightly pull up the buckle of the Note PC,
and the display panel will be unlocked.

2

Carefully open the display panel to the desired
angle.  You can open the display panel to 180
degrees.

SETTING UP

When you first use your-Mobile PC, always plug the AC power cord into the DC Input connector.

First, install the lithium-ion battery pack in the PC by following the steps below.  Proceed with
the setup while the battery pack is charging. To avoid data loss due to power failure or any other
cause, check the points for battery recharging in Page 18.

1. Mounting/Dismounting the Lithium-Ion Battery Pack

1

Slide lock lever A in the direction of the arrow
( ).

2

Mount and lock the battery pack until it clicks.

3

Slide lock lever A in the direction of the arrow
( ).

1

Slide lock lever A in the direction of the arrow
( ).

2

Slide and hold lock lever B in the direction of
the arrow ( ), and pull out and dismount the
battery pack in direction 

3

 as shown.

SETTING UP

•

 Mounting Battery Pack

•

 Dismounting Battery Pack

Lock lever A

Lock lever B

Buckle

XP831GB̲002̲022.p7.0J

04.4.28, 12:48

16

Summary of Contents for MP-XV841









































































































































































































































Reviews:

No comments