JVC MP-XV841 Instructions Manual Download Page 168

Page: 168 / 232

7. To check the received messages, click [Inbox] on the screen.

The received E-mail messages will be displayed.

8. To quit Outlook Express, click [x] at the upper right corner of the screen.

Cautions

• Disconnect your PC from the Internet after you have transmitted E-mail and finished

accessing a Web site.

• It may not be possible to send mail properly using a company network or roaming

service. If this problem arises, the method below may solve it.

Before sending the mail, first perform the receive mail operation even if no mail has
been received, and then click [Send].

NAVIGATE IN THE INTERNET WORLD!

Summary of Contents for MP-XV841









































































































































































































































Search results

Summary of Contents for MP-XV841

Reviews:

Related manuals for MP-XV841

Brands by name

Popular brands

JVC MP-XV841, Instructions Manual

Search results

Summary of Contents for MP-XV841

Reviews:

Related manuals for MP-XV841

Brands by name

Popular brands