manualshive.com logo in svg

JVC MP-XV841, Instructions Manual, Page: 18 / 232

Share
Download
JVC MP-XV841 Instructions Manual Download Page 18

18

 EN

4.  Make sure that the battery pack is fully recharged

To avoid an interruption of your operation due to power failure, check the battery voltage when
you start to use your PC in the field.  See “Checking the Battery Level” (see Page 79) to check the
battery voltage level.

•

 Make sure that the battery pack is fully recharged

When you are using the AC adapter and when the battery indicator (

) lights in green, the

battery pack is fully (100%) recharged.  When it lights in orange, the battery pack is being recharged.

 Battery indicator

If you have unplugged the DC cable of the AC adapter and if you drive your PC with the lithium-
ion battery pack, the battery indicator (

) goes out.

Approximate recharging times:

Lithium-ion
battery pack (BN-LL23US)

Recharging time
(When the PC’s power is off)

Approximately 180 minutes

Recharging time
(When the PC’s power is on)

Approximately 290 minutes

Cautions

• If the battery pack discharges quickly even after recharging, the battery service life has expired.

Replace it with a new one.  (The built-in CMOS backup cells are service parts.)

• The standard recharging times listed above are typical values in an ambient temperature of

20°C to 25°C (68°F to 77°F).

SETTING UP

XP841US̲002̲022.p7.0J

04.5.21, 6:25 PM

18

Summary of Contents for MP-XV841









































































































































































































































Reviews:

No comments